Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other

$24.95 - $29.95
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.
- Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup
- Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs
- Double chainrings are not currently supported
- Triple chainrings are not supported
- Direct Mount-native frames and SRAM derailleurs are not supported

$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility

$99.95
Wolf Tooth ReMote Sustain is a cable actuated lever for Reverb Stealth dropper seatposts. Featuring the same ergonomics as the standard ReMote 1x lever, the Remote Sustain is an ideal upgrade to plunger-style Reverb remotes.
- Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head
- Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash
- Cable Kind Clamp does not damage secured cables and features captive hardware
- Only compatible with Reverb Stealths
- Features a leak-proof, robust, and low-maintenance mechanical actuation system
- Easy cable detachment for service, travel or bike shipping
- 40mm reduction in in-frame height compared to Connectamajig Reverbs

$74.95
- The ReMote BarCentric is a dropper lever option for bikes with front shifters, lockout levers, or e-bike controls.
- The slender design of the ReMote BarCentric allows it to easily fit between the left grip and levers with four potential lever positioning options to avoid any interference with existing levers.
- This dropper lever has a ring shape that encompasses the handlebar, while also serving as a pivot point to provide the rider with extra leverage, making it easier to press the lever.
- Compatible with left side controls including 2x shifters, suspension lockout levers, and under-bar e-bike controls
- Large, smooth, sealed Enduro ball bearing that encircles the handlebar
- Clean and efficient cable routing flows around disc brake levers
- Adjustable reach for ideal ergonomics and controls clearance
- Compatible with all cabled actuated droppers posts

$21.95
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter.
- The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes
- 11-42 or 10-42 setups are not supported
- Works with all 10-11 speed Shimano and SRAM Road Derailleurs
- Best used with Single or Double Setups - see manufacturer's site for more details

$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force.
- M6 stainless steel bolt with integrated washer
Tool interface - 4mm hex key

$29.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6 mm long so they work perfectly with any bolt-on single chainring that does not have threaded standoffs.
- Design and manufactured in Minneapolis, MN USA
- 7-8 NM tightening torque with light grease on threads only
- Material - 7075-T6 aluminum
- Weight - 5 bolts = 10 grams

$44.95
Tanpan allows the usage of Shimano Road Shifters with Shimano Dynasys rear derailleurs. Built to translate the differing cable pulls between the two systems, Tanpan allows for wider gear range, more gear options and better chain security with clutch derailleurs for road or gravel drivetrains.
- Not Compatible with Tiagra 4700
- Compatible with most road, CX and gravel bikes
- Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs
- Certain chainring and cassette configurations benefit from a Goatlink
- If the rear derailleur cable is routed internally through the chainstay and exits at the end of the - chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule

$18.50
Display packaged headset spacers for 1-1/8" fork steerer. Black anodized aluminum. Includes one each:
- 2.5mm
- 5mm
- 7.5mm
- 10mm

$15.95
Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black

$3.00 - $24.95
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be.
- Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

$3.94 - $18.64
Aluminum headset stack spacers precision-cut to ensure proper headset function.
- Precision-cut for proper function
- Inner Diameter: 28.9mm
- Outer Diameter: 34.4mm
- Precision-machined aluminum

$47.25
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

$68.25
BB30 service kit includes (2) Enduro 6806 ABEC-5 Angular Contact sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems

$10.45 - $20.48
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag

$6.83 - $13.13
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$65.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Trek Part #282088 Notes: - Post on this hanger is 20mm (.825) in length with an M12 x 1.75 thread. Please check your hanger before ordering to make sure this is a match. - Trek recommends that you apply a removable thread-locker such as LOCTITE 243 to the threads during re-assembly. Failure to do so may result in fasteners loosening during use.

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring bolt

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M4x8 Flat head screws included Note: This dropout is very similar to Wheels Mfg DROPOUT-261.

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M4x14 socket head screws included - Replaces Diamondback Part # 32-68-004

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 socket head screw included - Replaces Specialized Amazinger 2.0 (S16260002) and Amazinger 2.1 (S172600003) Hanger

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket Head Screw Included - For 12x1.5 MAXLE - Replaces Pivot Part #018 (FP-RDH-TA-12MM-BLK-V3)

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For 148 Thru Axle Frames - Replaces Santa Cruz Part #04-17052

$32.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Scott Part #235286 - Attaches to frame with (2) special M5x10 screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish

$32.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Raleigh part #32-68-231 - Attaches to frame with (1) M4x12 Socket head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish - This hanger is not interchangeable with Diamondback Part # 32-68-060 (DROPOUT-291)
Page 1 of 33
Next page