The Artificial Rain Gutters from Thule let you attach any of their classic cargo racks (sold separately) to vehicles that lack integrated rain gutters. These are most commonly installed on camper tops, pickup truck caps, and Jeep Wrangler tops. This set includes four Artificial Rain Gutters and rubber gaskets to protect your car's finish.
Premium trunk-mount bike carrier with raised platform designed to keep the rear lights and license plate visible, and fits wide range of vehicles including those with a spoiler. - Maximum fastening security to your vehicle with steel cables - Quick and easy mounting to car thanks to simple user interface and intuitive torque-limiting tightening system - Firm carrier hold and vehicle protection with twin hook attachment and rubber protection pads - Improved visibility of rear lights and license plate with raised platform design - Easy mounting of bikes with adjustable/removable bike arms and Thule AcuTight torque limiter knobs that click when optimal torque is reached - Accommodates up to 127cm/50" wheelbase bikes - Simple to fasten wheels, thanks to long wheel straps with pump buckles - Locks the bike to the bike rack and the bike rack to the roof racks (locks included) - Folds flat for easy transport and convenient storage - No assembly required - Possible to open vehicle trunk without any mounted bikes Technical specifications - Max number of bikes: 2 - Load capacity: 66 lb - Max bike weight: 33 lb - Dimensions: 23 x 50 x 47 in - Folded dimensions: 9.4 x 30.7 x 21.3 in - Weight: 27.6 lb - Carbon frame compatible - Rear lights and number plate visible with bikes mounted - One Key System compatible - Lockable bike-to-rack - Lockable rack-to-vehicle
The heavy-duty, award-winning Thule T2 Pro is now even easier to install, remove and store thanks to the integrated wheels. - Versatile design fits nearly all styles of bikes up to 60 lbs with zero frame contact - AutoAttach system makes installation and removal simple and tool-free - Integrated wheels help to maneuver the rack on and off the vehicle - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Fits 20-29" wheels and up to 5" tires without adapters making it ideal for carbon frames, mountain, downhill, or fat bikes - Integrated cable lock and lock knob locks bikes to the rack and secures the rack to the receiver - Generous spacing between bike mounts with the ability to adjust side to side to eliminate bike interference - Carries up to 4 bikes with Thule T2 Pro XT Add-On (sold separately, 9036XTB, 2" receiver only)
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.
Let Us Do the Lifting If you’re searching for the ultimate bike rack for eBikes, look no further than the Saris Door County. Powered by your vehicle’s 7-pin connection, the Door County is a full-service electric bike rack for electric bikes. Simply turn the key and press a button, and the Door County platform hitch rack effortlessly lifts eBikes into the transport position, and back down again. And when you’re on the road, the Door County keeps the electric vibe going with glowing tail lights, including running, brake and turn signals. As for your precious two-wheeled cargo, the Saris Door County can transport two bikes, up to 60 lb. per bike, and sports integrated locks. The Door County’s unique lobster claw-style bike holds easily adjust to accommodate common electric bike features, such as fenders and down-tubemounted batteries. Ferocious in name only, the Door County’s lobster bike claws are gentle on your bike’s paint and ensure peace of mind as you travel down the road. And when you’re ready to call it a day, the Door County folds for storage and convenient wheels make it easy to roll away. - Full-Service Hitch Rack: raises and lowers bikes with electric lift assist, eliminating the need to manually lift heavy eBikes. - eBike Friendly Bike Holds: unique “lobster claws” securely hold bikes without touching fenders or eBike battery mounts. - Complete Integrated Security: locks the rack to the car and the bikes to the rack, plus tail lights for enhanced visibility. - Roll & Ride: folds for compact storage and maneuvering, while built-in wheels make it easy to roll into place. - For use with 2” hitch receivers only. (Not approved for use on RVs or tow-behind RVs and trailers). Bike Capacity - Carries 2 bikes, up to 60 lb/each. - This rack fits a wheelbase of up to 48". - Compatible with bike tires up to 3". Product Design - Electric platform style hitch rack. - For use with 2” receivers only. (Not approved for use on RVs or tow-behind RVs and trailers). - Electric system raises and lowers bikes with rack-mounted turn-key controls and buttons. - Electric system powers tail lights (running, brake, turn signals) for extra visibility. - Electric system connects to vehicle via 7-pin bladed connection. - Lobster claw-style locks the bike by the frame, ideal for bikes with fenders or eBikes with down-tube mounted batteries. - Integrated locking secures rack to the car, and bikes to the rack. - Tilting feature allows access to rear of vehicle, even when fully loaded. - Rack trays fold inwards for compact storage. - Integrated wheels allow rack to be maneuvered when folded. - Wheel straps are provided for front and rear wheel for extra peace of mind. - 1-year warranty for electronics Product Dimension - Rack weight: 63 lb.
All the Essentials of a Reliable Trunk Rack With the Guardian bike rack, what you see is what you get. And what you see is a complete trunk rack, simplified to its purest form. Made with steel sourced from America's heartland, the Guardian is tough enough to stand-up to the elements, yet gentle on bikes. Easy-to-use bike hold downs with ratcheting straps grip the bike's frame, while rack straps equipped with spring-loaded buckles ensure a snug rack-to-vehicle fit. This simple trunk rack fits most sedans, hatchbacks and vans, and comes completely assembled. Just take it out of the box, put it onto the car, and you'll be rolling in no time. Features - Carries 2 bikes (35 lb./bike) - A Bike Beam may be required for frames without a horizontal top tube. - Trunk bike rack. - No assembly needed. - Bike hold downs with ratcheting straps separate and firmly hold up to 3 bikes. - Bike rack straps with spring-loaded buckles ensure secure rack-to-vehicle fit. - Rack arms adjust to fit most sedans, hatchbacks and vans. - American-made steel frame construction. - Folds for compact, convenient storage. - Coated hooks protect vehicle's finish. - Heavy-duty foam pads protect vehicle's finish.
Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.
With its robust construction, eye-catching style and compact design that carries both bikes on a single bar, the SuperClamp is your bike’s new BFF. This lightweight – yet mighty – platform hitch rack is ready to hit the road at a moment’s notice. Whether you’re hauling eBikes, beefy mountain bikes, your prized TT rig, or an assortment of bicycles, the SuperClamp’s dual shepherd’s hooks promise all bikes a truly secure ride without touching the bike’s frame. And thanks to the SuperClamp’s tilting feature, no more unloading bikes to let the dog out of the back. Simply tilt down and release the hounds. Top it all off with integrated locks, a built-in bottle opener and head-turning reflectors, the SuperClamp 2-bike is proof that you can have your cake and eat it too. - Fastest loading bike rack around thanks to the dual wheel-clamping hooks (bonus: no frame contact). - Lightweight, yet mighty! Weighs only 35 lb, and is rugged enough to carry 2 bikes, up to 60 lb each. - Features integrated locks and reflectors for extra security and visibility, day and night. - Open Sesame! Tilting feature allows hatch access, even when fully loaded, and folds up when not in use. - Sleek and compact design holds 2 bikes on a single bar.
Swing into Action Turn your Saris hitch rack into a swing away with this hitch rack accessory. Featuring 90° of pivot, the Swing Away Accessory gives you free and clear hatch access without removing your bikes. Designed to handle up to 250 lb. of rack plus bike weight, the Swing Away Accessory is compatible with our most popular hitch racks – including the Freedom and SuperClamp platform hitch racks. Convenient and built-in carrying handles make it easy to maneuver and install, while the included Hitch Tightener ensures secure travels down the road. For those times when only a swing away will do, there’s the Saris Swing Away Accessory. Product Features - Turns your favorite Saris hitch rack into a swing away. - Pivots 90° and locks in open position. - Carries up to 250 lb. of rack + bike weight. - For use with 2” receivers only. - For specific rack model compatibility see specifications below. Rack Compatibility - Compatibility information for Saris hitch racks - Compatible with bikes up to 35 lb. per bike tray for the following models: - SuperClamp EX 2-Bike (4025F) - SuperClamp HD 2-Bike (4025HD) - Freedom EX 2-Bike (4412F) - Freedom 2-Bike (4412B) - Glide EX 4-Bike (774) - Compatible with bikes up to 60 lb. per bike tray for the following models: - MTR 1-Bike (4031) - MTR 2-Bike (4032) - Tilting/folding feature of Freedom, SuperClamp or MTR racks can be used when on the Swing Away Accessory in the "closed" position. - Gliding feature of the Glide EX is not recommended when installed on Swing Away in the "closed" or "open" (swung away) position. - Check with your hitch rack manufacturer (non Saris) to see if your existing hitch rack can be used with extenders. Product Design - Swings away to 90° for full vehicle hatch access. - For use with 2” receivers only. - Weight capacity: 250 lb. (rack, plus bikes). - Hitch Tightener system securely locks hitch into place, securing the base to your vehicle. - Two integrated carrying handles.
Bike fork mounts you can put anywhere, including truck beds, minivans and SUVs An all-in-one design that fits four thru axle spacing standards: - 15mm x 100mm - 15mm x 110mm - 12mm x 100mm - 20mm x 110mm - Mounts directly to any flat surface for bike transport or storage - Ultimate stability and versatility when mounted t- Saris Triple Track or Single Track (sold separately) - Mounting hardware not included
The MonoRail is the most versatile rack in the RockyMounts line up. It has the capacity for all styles of bikes; from skinny tire road machines, up to heavy fat tire E-bikes, this rack has you covered. - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). 2” variant is expandable to 3 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and our adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles - Rack weight 39 lbs (shipping weight 51 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door
$54.95 - $59.95
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
$171.99 - $225.00
Shuttle Saver - Our new T2 pad is made to fit any shape of tailgate, and has an adjustable rear camera panel - both RF exclusive, patent pending features. Carry up to 6 bikes with no bike on bike crime with raised bumpers + downtube straps. Backup Plan - Exclusive to the T2 is the adjustable rear panel that allows for easy adaptation to any rear camera + handle position. Shape Shifter - Six adjustment straps along top edge of the installed pad provide a fit tailored to your tailgate’s shape - even curved! Just Say No - To bike on bike crime. The T2 features raised bumpers in the truck box that keep frame downtubes in place and secure, minimizing contact while shuttling. Specs - Construction: PVC tarpaulin with micro-brushed inner lining - Adjustment: Top edge adjustment, camera window adjustment - Other: Raised bike spacers and padding, hook-and-loop frame straps, lock loop Bike Capacity - Mid-Size Truck (Tacoma or similar): 5-bike - Full-Size Truck (Ford F-150, F-350 or similar): 6-bike
The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.
We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.
Expand your vehicle’s carry capacity (and your circle of friends) up to four bikes with the NV 2.0 Add-Ons. It's conceived for road trips, family group rides and expeditions in the backcountry—we took the best platform rack on the market and increased it. Integrated Cable Locks - Seamlessly integrated locks—long enough to fit any frame—make sure your bike stays off Craigslist while you enjoy that post-ride beer stop. And when you’re ready to roll again, they stow right back into the rack. Adjustable Tire Cradles - Bikes not wanting to share space nicely? Easily dial in the fit with adjustable tire scoops. You get three positions to choose from, so handlebar and seat post clearance is never an issue. - Intuitive Front Tire Ratchet - Trail-Doc Compatible - Premium Protective Gloss or Matte Powdercoat
With years of experience and feedback, Kuat overhauled every feature and streamlined the look while maintaining the spirit of its predecessor. A re-designed pivot system with foot assist will endure a lifetime of abuse. Adjustable cradles allow for fast bike fit adjustments. Individual bike cable locks are longer, more durable, and easier to use. Holds bikes with up to 4.8-inch tires ensure a true fit for any bike in your stable. Updated ratchet arm creates an intuitive release and a more stable tow. The ground-up re-design of the Trail Doc work stand delivers a pro level feel. These are only the highlights, resulting from 3 years of extensive development, making the NV 2.0 the most advanced hitch rack on the planet. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks - Trail Doc included - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium gloss metallic powder with water transferred logos - Hitch lock included - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch, and tires as large as 4.8-inch with use of the Phat Bike Kit - Fits 20-inch to 29-inch tires - Wheel adapter needed for 20-24-inch tires - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV 2.0 Add-On
Piston Fender Strap Kit
"What if?" - When we asked the question, the Piston Pro X was the answer. Genuine Kashima coated hydro-pneumatic arms make loading and unloading a one-handed operation. Touchless arms grab the tires, keeping your bike secure, and your paint pristine. Low-profile integrated LED tail lights synchronize with your vehicle, providing enhanced rear visibility and on-road safety. These and many other features culminate in a rack designed, built, and tested to push the envelope and provide you with unparalleled ease of use, peace of mind, and lasting value. This is the Piston Pro X. OneTap Hit the levers and watch as the cradle arms open automatically into position. Kuat's new patented hydro-pneumatic OneTap levers make loading your bikes easy, and fun. FastFit Wheel Chock System It's called FastFit for a reason: This patent-pending feature changes wheel sizes from 18" to 29" in seconds, tool-free. QuickConnect QuickConnect lets you expand or consolidate your Piston from 2 to 4 bikes in a matter of minutes. Current record: 44s. Foot & Hand Pivot Fold your Piston up or down with the convenient foot pedal. Have a fully loaded 4-bike? Easy Assembly EasyClip patent-pending tray tabs make assembling your Piston quick and painless. Spend all that time you save riding your bike. 99% Metal Construction Just because it's sexy doesn't mean it isn't heavy duty. The Piston Pro X is all metal and ready to take on all the adventure you can throw at it. TIGER DRYLAC The Piston Pro X is finished with TIGER DRYLAC, a class-leading powdercoat designed for the unforgiving conditions of both day-in, day-out commutes and epic road trips alike. Hard Wearing Hardware Igus bushings and 308 Stainless Steel, 750-hour salt spray automotive-grade hardware keep the burly, long-lasting trend going. This rack will stand up to years of demanding mileage and use. Liquid Painted Logo A little cherry on top: A liquid painted 3D logo finishes out the rack aesthetic adding dimension and style. LED Taillights QuickConnect patented trays and Add-Ons are prewired. LED lighting will connect and sync automatically when assembled. Connects to the vehicle via the included flat 4-pin connector. Magnetic Cable Docking Set up is as easy as snapping in the magnetic cable, and plugging the 4-Pin into your vehicle's trailer outlet. No confusing diagrams or head scratching routing. POGO Pins QuickConnect patented Add-Ons are pre-wired. Simply install the Add-On and the LED lightning will connect and sync automatically. Cable Management Provided magnetic clips let you manage the LED cable, keeping everything tidy and out of the way. Locking Security Tool No more Where's Waldo in your glovebox: The multi-purpose security tool locks in place at the end of the rack, ensuring it's always there when you need it. Flatlock Hitch Cam The patent-pending Flatlock hitch cam keeps things stable and its tamper-resistant head keeps it secure. Plus, we've added a stainless steel hitch lock for double security and additional peace of mind. High-Strand 12mm Cable Semi-integrated ultra flexible high strand 12mm cable, with plenty of length for the wheels and frames of all your bikes. The soft touch outer coating is also easy on your bikes.
$749.00 - $1,289.00
Piston X Add On LED Dual Ratchet Platform Rack with Kashima
Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to. - Clearance for tailgates or rear doors - Proprietary FLATLOCK cam system - Locking hitch pin - Lifetime Warranty - 2” Hitch Only - Quick-release 90 or 120 degree swing away - Driver-Side or Passenger-Side Swing Options - Compatible with fully loaded 4-bike NV 2.0 - Load up to a maximum of 250lbs
RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate
The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes
Imagine for a moment if you can…for the same cash you spent on that overhyped, overly complex hanging style rack, you could get your hands on the Küat Transfer. This budget-friendly beast boasts stout steel construction that won’t leave you hanging. The one-bike add-on is compatible with Kuat's Transfer 1.
$349.00 - $549.00
The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price. - Flatlock cam for 2", ball cam for 1.25" - Includes semi-integrated bicycle cable lock - Tamper-resistant hitch security - More robust hitch design for enhanced stability in tow - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes - Automotive-grade 750 hour salt spray hardware - Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.
The new Transfer v2 models can each be expanded to carry an additional bike with the 1-Bike Add-On. Increase the capacity of your 1-Bike, 2-Bike, or 3-Bike rack to carry up to 4 bikes* with all the features you expect at a price that's unexpected. *Add-Ons cannot be stacked. Only a single 1-Bike Add-On can be attached to Transfer v2 models. The 1.25"-2" Transfer v2 2-bike (SKU T202B) model cannot take a one-bike add-on. - Automotive-grade 750 hour salt spray hardware - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes
Page 1 of 10 Next page