Other

Lock it and drop it Upgrade the look and feel of your MTB XC race cockpit with the DropLock Remote. By combining a dual-suspension lockout remote with an integrated dropper lever, you get a single remote that controls the functions of your suspension and dropper post. For the lockout, a single button controls both the on and off function of front and rear suspension. A single remote that combines a dropper lever with a dual-control suspension lockout for simple operation and clean setup. - Integrated dropper and dual-remote lockout lever for a cleaner cockpit - Single lockout lever controls both on/off - Removeable dropper lever - Compatible with mechanically activated droppers and suspension lockout systems

- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs

- Powermeter Crank Arm Bolt Kit and AXS Cover Plug Drive Side M18/M30 Dub Steel Black Rival D1

Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!

If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system. - Thread Length: 9mm - Thread Pitch: 15 x 1.5mm

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever

The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.

The Problem Solvers Handlebar Accessory Mount comes in handy when you don't have enough room on your handlebars for mounting all your accessories. It fits onto all handlebars, holds tightly and gives you 80mm of width for mounting more of your essential devices where they're easy to see and use (photo).

Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters

With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames. - Features threaded eyelets for rear rack mounting solutions on unique bike frames - Quick release (QR) versions include rubber lever grip

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

Genuine replacement parts When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Details: - Replacement cartridge units for Bontrager Line Dropper seat posts - Be sure to use the correct size cartridge for the respective amount of travel - Regular maintenance will help maintain performance and extend the lifespan

Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375

Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands

Clean up your Bontrager Elite stem cockpit with Blendr Elite bases. Blendr works with this simple formula: Stem + Base + Mount. Add accessory. Key features: - Bases for use with Elite stem - Add any XXX accessory mount for an elegant integrated look

- Pike and Pike DJ Solo Air 1 year service kit - Includes dust seals, foam rings, o-ring seals, Charger sealhead, SA sealhead

- X01 Eagle Rear Derailleur B-Bolt and Limit Screw Kit Hex5

The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.

Lyrik RC2 C1 200 Hour Service Kit

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

The Southpaw family of remote levers are designed for a secure feel without added complexity and weight, while incorporating ergonomics that compliment modern cockpits. - Ergonomically designed for 1x setups - Universal lever body - Integrated barrel adjuster - Stainless steel hardware - Understated graphics

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm

- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack

Shimano Rear Derailleur Pulley Assemblies

Featuring a universal design that allows the switch from a bolt to QR-style clamp, the Hope Seat Clamp is designed to keep your seat post in one spot and look good doing it. - CNC-machined aluminum lever and clamp - Brass cam allows increased durability clamping force - Laser-etched logos

Featuring a universal design that allows the switch from a bolt to QR-style clamp, the Hope Seat Clamp is designed to keep your seat post in one spot and look good doing it. - Collar can be converted to QR

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.

Eyelet Bushings for repair and maintenance of Rockshox rear shocks.

Replacement Pulley Wheels for the CeramicSpeed OSPW System. Includes 2 pulley wheels. - Precision-machined aluminum pulleys - For use with CeramicSpeed's Oversized Pulley Wheel System only - Coated races increase bearing service life by increasing hardness of race and reducing corrosion - CeramicSpeed products with coated bearings include a 6-year warranty

Get back on the trail with a quality replacement hanger. - Trek/Fisher full suspension rocker pivot suspension hardware - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 148x12mm Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut

IFP tubes pass through the inside of the IFP. - Fits Reverb and Reverb Stealth

RockShox Reverb/Reverb Stealth IFP - Fits Reverb and Reverb Stealth

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Genuine replacement parts Revive your ride with these BB90/95 bottom bracket bearings. Replacement V2 bearings for oversized bottom brackets. - V2 Bearing to be used in BB90 or BB95 shell when bottom bracket bearing bore is slightly oversized - Measurable Outer Diameter (OD) of bearing is 37.1 x 21 x 8mm - Steel bearings - Oversize bearing for non-drive side of SRAM BB90 road cranks & SRAM BB95 MTB cranks

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Derailleur shims for adapting front derailleur clamps to a different sized frame seat tube. - Derailleur = the size of the clamp on the front derailleur you have - Frame = the size of the seat tube the derailleur plus shim will fit

One of the single biggest improvements you can make to your fork. Engineered and developed over several years, the PUSH Ultra Low Friction fork seals provide class leading sealing while offering incredibly low friction, resulting in an increase in small bump sensitivity. - Advanced friction-reducing, Molybdenum filled material increases small bump sensitivity while also increasing durability - Dual scraping lip design provides maximum scraping effect while minimizing friction - Loaded oil sealing lip integrated into wiper to keep lower leg fluid from escaping fork, increasing performance and durability - High-volume, absorbent foam rings ensure consistent lubrication improving seal life and bump sensitivity - Molded utilizing precision 3D machined molds for exact tolerance

This top cap perfectly matches the graphics on all new Ritchey Comp stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included. - Material: alloy - Includes top cap, bolt, and plastic cap - Fits with 1-1/8" stems - Weight: 8g

Complete clamp kit to adapt WCS Alloy 1-bolt posts to various saddle rail dimensions. - To retrofit WCS 1-Bolt alloy seatpost - Material: 7050 alloy, stainless steel bolt

Replacement bolts for Ritchey stems. Original equipment stem hardware ensures exact fit and finish.

The iconic Ritchey logo is proudly emblazoned on these original 1-1/8" super-light glossy carbon headset spacers. - UD Glossy Carbon - White Ritchey logo - 1-1/8" - In the pack: (3x) 5mm + (3x) 10mm

Featuring a tasteful TR logo, this top cap perfectly matches the graphics on all new Ritchey WCS stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included. - Material: alloy - Includes top cap, bolt, and plastic cap - Fits 1-1/8" stems - Weight: 8g

Saddle Rail Clamp outer-pieces to adapt WCS Alloy 1-bolt posts to various saddle rail dimensions. - To retrofit WCS 1-Bolt alloy seatpost - Material: 7050 alloy

Replacement dropout kit for Ritchey Timberwolf frames - Includes both drive and non-drive side dropouts

Authentic Ritchey hub conversion kit for mountain bike hubs. Hub Conversion Kit For MTN Hubs—TA 142x12 to QR

Designed for legacy Shimano STI shifting systems, the Ritchey Cable Barrel Adjuster allows you to dial in your shifting with ease and precision. - Cable Tension Barrel Adjusters - STI compatible - Adjust the cable tension for optimal STI shifting

Replacement faceplates for Ritchey WCS C220 stems.

Aeffect Crank Stopper Kit for Race Face Aeffect cranks slows and stops the crank for no-footed tricks.

RockShox XLoc Parts

Replacement parts for Paul rim brakes.

The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.

Paul Components Melvin Chain Tensioner. Converts frames for single speed use. Long enough for a Dingle-setup, (2 rings, one cog) 20T max. - The Melvin uses two pulleys, just like a rear derailleur, which gives it 20 teeth of chain wrap - Will work with multiple front chain rings while maintaining proper chain tension - The pulleys are made of extruded and machined aluminum and have sealed bearings for durability - Pulleys are 2.25mm thick at the tooth which fits inside most narrow 6 through 9 speed chains, and the pulley cage is wide enough to allow 1/8? single speed chains as well - Long enough for a Dingle-setup, (2 rings, one cog) 20T max - Do not use with a coaster brake or fixed gear - Includes Paul's own Sealed Bearing Pulleys