Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.
The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets
The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g
The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.
We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black. - Load weight limit 30 lbs. - 15-3/8 x 10-inches - Rack weight 650g - 6061-TB Aluminum - Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack - Mounting Hardware Included
A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 26" city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too.
Topeak's Disc-Mount Rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. And, this tubular aluminum rack features tabs that clear most disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger or extra storage room.
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap onto your big-wheeled bike. It's made of tubular aluminum, fits most bikes with disc brakes, hauls up to 55 pounds and has a center strip that acts like a short fender. It's compatible with Topeak's QuickTrack bags and accessories (sold separately), too.
A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too. Plus, it comes with a spring that folds up to clamp securely onto books, magazines and other thin objects.
Topeak's BabySeat II rear rack allows you to easily mount your BabySeat II (sold separately) to your 29er. This tubular aluminum rack features tabs that clear most rear disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger.
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
Original replacement rack for Trek 920. Product details - Designed to fit forks with forward-facing eyelets at the dropout - Designed specifically for use with Trek 920 bikes Specifications - Size: One size - Rack type: Front racks - Adjustable feet: No - Disc compatible: Yes - Includes light mount: No - Weight capacity: 50 lbs (22 kg) - Material: Aluminum
Original replacement rack for Trek 1120. Product details - Color matched for direct compatibility - Includes bracket to mount a rear light - Does not include mounting hardware - Not intended for use with child carriers Specifications - Size: One size - Rack type: Rear racks - Adjustable feet: No - Disc compatible: No - Includes light mount: Yes - Weight capacity: 26lbs (12kg) - Material: Aluminum
Previous page Page 2 of 2